Supporting Free-Threaded CPython

CPython 3.13 introduces an experimental "free-threaded" build of CPython that does not rely on the global interpreter lock (often referred to as the GIL) for thread safety. As of version 0.23, PyO3 also has preliminary support for building Rust extensions for the free-threaded Python build and support for calling into free-threaded Python from Rust.

If you want more background on free-threaded Python in general, see the what's new entry in the CPython docs, the HOWTO guide for porting C extensions, and PEP 703, which provides the technical background for the free-threading implementation in CPython.

In the GIL-enabled build, the global interpreter lock serializes access to the Python runtime. The GIL is therefore a fundamental limitation to parallel scaling of multithreaded Python workflows, due to Amdahl's law, because any time spent executing a parallel processing task on only one execution context fundamentally cannot be sped up using parallelism.

The free-threaded build removes this limit on multithreaded Python scaling. This means it's much more straightforward to achieve parallelism using the Python threading module. If you have ever needed to use multiprocessing to achieve a parallel speedup for some Python code, free-threading will likely allow the use of Python threads instead for the same workflow.

PyO3's support for free-threaded Python will enable authoring native Python extensions that are thread-safe by construction, with much stronger safety guarantees than C extensions. Our goal is to enable "fearless concurrency" in the native Python runtime by building on the Rust Send and Sync traits.

This document provides advice for porting Rust code using PyO3 to run under free-threaded Python.

Supporting free-threaded Python with PyO3

Many simple uses of PyO3, like exposing bindings for a "pure" Rust function with no side-effects or defining an immutable Python class, will likely work "out of the box" on the free-threaded build. All that will be necessary is to annotate Python modules declared by rust code in your project to declare that they support free-threaded Python, for example by declaring the module with #[pymodule(gil_used = false)].

More complicated #[pyclass] types may need to deal with thread-safety directly; there is a dedicated section of the guide to discuss this.

At a low-level, annotating a module sets the Py_MOD_GIL slot on modules defined by an extension to Py_MOD_GIL_NOT_USED, which allows the interpreter to see at runtime that the author of the extension thinks the extension is thread-safe. You should only do this if you know that your extension is thread-safe. Because of Rust's guarantees, this is already true for many extensions, however see below for more discussion about how to evaluate the thread safety of existing Rust extensions and how to think about the PyO3 API using a Python runtime with no GIL.

If you do not explicitly mark that modules are thread-safe, the Python interpreter will re-enable the GIL at runtime while importing your module and print a RuntimeWarning with a message containing the name of the module causing it to re-enable the GIL. You can force the GIL to remain disabled by setting the PYTHON_GIL=0 as an environment variable or passing -Xgil=0 when starting Python (0 means the GIL is turned off).

If you are sure that all data structures exposed in a PyModule are thread-safe, then pass gil_used = false as a parameter to the pymodule procedural macro declaring the module or call PyModule::gil_used on a PyModule instance. For example:

use pyo3::prelude::*;

/// This module supports free-threaded Python
#[pymodule(gil_used = false)]
fn my_extension(m: &Bound<'_, PyModule>) -> PyResult<()> {
    // add members to the module that you know are thread-safe
    Ok(())
}

Or for a module that is set up without using the pymodule macro:

use pyo3::prelude::*;

#[allow(dead_code)]
fn register_child_module(parent_module: &Bound<'_, PyModule>) -> PyResult<()> {
    let child_module = PyModule::new(parent_module.py(), "child_module")?;
    child_module.gil_used(false)?;
    parent_module.add_submodule(&child_module)
}

For now you must explicitly opt in to free-threading support by annotating modules defined in your extension. In a future version of PyO3, we plan to make gil_used = false the default.

See the string-sum example for how to declare free-threaded support using raw FFI calls for modules using single-phase initialization and the sequential example for modules using multi-phase initialization.

If you would like to use conditional compilation to trigger different code paths under the free-threaded build, you can use the Py_GIL_DISABLED attribute once you have configured your crate to generate the necessary build configuration data. See the guide section for more details about supporting multiple different Python versions, including the free-threaded build.

Special considerations for the free-threaded build

The free-threaded interpreter does not have a GIL, and this can make interacting with the PyO3 API confusing, since the API was originally designed around strong assumptions about the GIL providing locking. Additionally, since the GIL provided locking for operations on Python objects, many existing extensions that provide mutable data structures relied on the GIL to make interior mutability thread-safe.

Working with PyO3 under the free-threaded interpreter therefore requires some additional care and mental overhead compared with a GIL-enabled interpreter. We discuss how to handle this below.

Many symbols exposed by PyO3 have `GIL` in the name

We are aware that there are some naming issues in the PyO3 API that make it awkward to think about a runtime environment where there is no GIL. We plan to change the names of these types to de-emphasize the role of the GIL in future versions of PyO3, but for now you should remember that the use of the term GIL in functions and types like Python::with_gil and GILOnceCell is historical.

Instead, you should think about whether or not a Rust thread is attached to a Python interpreter runtime. Calling into the CPython C API is only legal when an OS thread is explicitly attached to the interpreter runtime. In the GIL-enabled build, this happens when the GIL is acquired. In the free-threaded build there is no GIL, but the same C macros that release or acquire the GIL in the GIL-enabled build instead ask the interpreter to attach the thread to the Python runtime, and there can be many threads simultaneously attached. See PEP 703 for more background about how threads can be attached and detached from the interpreter runtime, in a manner analagous to releasing and acquiring the GIL in the GIL-enabled build.

In the GIL-enabled build, PyO3 uses the Python<'py> type and the 'py lifetime to signify that the global interpreter lock is held. In the freethreaded build, holding a 'py lifetime means only that the thread is currently attached to the Python interpreter -- other threads can be simultaneously interacting with the interpreter.

The main reason for obtaining a 'py lifetime is to interact with Python objects or call into the CPython C API. If you are not yet attached to the Python runtime, you can register a thread using the Python::with_gil function. Threads created via the Python threading module do not not need to do this, but all other OS threads that interact with the Python runtime must explicitly attach using with_gil and obtain a 'py liftime.

Since there is no GIL in the free-threaded build, releasing the GIL for long-running tasks is no longer necessary to ensure other threads run, but you should still detach from the interpreter runtime using Python::allow_threads when doing long-running tasks that do not require the CPython runtime. The garbage collector can only run if all threads are detached from the runtime (in a stop-the-world state), so detaching from the runtime allows freeing unused memory.

Exceptions and panics for multithreaded access of mutable `pyclass` instances

Data attached to pyclass instances is protected from concurrent access by a RefCell-like pattern of runtime borrow checking. Like a RefCell, PyO3 will raise exceptions (or in some cases panic) to enforce exclusive access for mutable borrows. It was always possible to generate panics like this in PyO3 in code that releases the GIL with Python::allow_threads or calling a python method accepting &self from a &mut self (see the docs on interior mutability,) but now in free-threaded Python there are more opportunities to trigger these panics from Python because there is no GIL to lock concurrent access to mutably borrowed data from Python.

The most straightforward way to trigger this problem to use the Python threading module to simultaneously call a rust function that mutably borrows a pyclass. For example, consider the following implementation:

use pyo3::prelude::*;
fn main() {
#[pyclass]
#[derive(Default)]
struct ThreadIter {
    count: usize,
}

#[pymethods]
impl ThreadIter {
    #[new]
    pub fn new() -> Self {
        Default::default()
    }

    fn __next__(&mut self, py: Python<'_>) -> usize {
        self.count += 1;
        self.count
    }
}
}

And then if we do something like this in Python:

import concurrent.futures
from my_module import ThreadIter

i = ThreadIter()

def increment():
    next(i)

with concurrent.futures.ThreadPoolExecutor(max_workers=16) as tpe:
    futures = [tpe.submit(increment) for _ in range(100)]
    [f.result() for f in futures]

We will see an exception:

Traceback (most recent call last)
  File "example.py", line 5, in <module>
    next(i)
RuntimeError: Already borrowed

We plan to allow user-selectable semantics for mutable pyclass definitions in PyO3 0.24, allowing some form of opt-in locking to emulate the GIL if that is needed. For now you should explicitly add locking, possibly using conditional compilation or using the critical section API to avoid creating deadlocks with the GIL.

Cannot build extensions using the limited API

The free-threaded build uses a completely new ABI and there is not yet an equivalent to the limited API for the free-threaded ABI. That means if your crate depends on PyO3 using the abi3 feature or an an abi3-pyxx feature, PyO3 will print a warning and ignore that setting when building extensions using the free-threaded interpreter.

This means that if your package makes use of the ABI forward compatibility provided by the limited API to uploads only one wheel for each release of your package, you will need to update and tooling or instructions to also upload a version-specific free-threaded wheel.

See the guide section for more details about supporting multiple different Python versions, including the free-threaded build.

Thread-safe single initialization

Until version 0.23, PyO3 provided only GILOnceCell to enable deadlock-free single initialization of data in contexts that might execute arbitrary Python code. While we have updated GILOnceCell to avoid thread safety issues triggered only under the free-threaded build, the design of GILOnceCell is inherently thread-unsafe, in a manner that can be problematic even in the GIL-enabled build.

If, for example, the function executed by GILOnceCell releases the GIL or calls code that releases the GIL, then it is possible for multiple threads to race to initialize the cell. While the cell will only ever be intialized once, it can be problematic in some contexts that GILOnceCell does not block like the standard library OnceLock.

In cases where the initialization function must run exactly once, you can bring the OnceExt or OnceLockExt traits into scope. The OnceExt trait adds OnceExt::call_once_py_attached and OnceExt::call_once_force_py_attached functions to the api of std::sync::Once, enabling use of Once in contexts where the GIL is held. Similarly, OnceLockExt adds OnceLockExt::get_or_init_py_attached. These functions are analogous to Once::call_once, Once::call_once_force, and OnceLock::get_or_init except they accept a Python<'py> token in addition to an FnOnce. All of these functions release the GIL and re-acquire it before executing the function, avoiding deadlocks with the GIL that are possible without using the PyO3 extension traits. Here is an example of how to use OnceExt to enable single-initialization of a runtime cache holding a Py<PyDict>.

fn main() {
use pyo3::prelude::*;
use std::sync::Once;
use pyo3::sync::OnceExt;
use pyo3::types::PyDict;

struct RuntimeCache {
    once: Once,
    cache: Option<Py<PyDict>>
}

let mut cache = RuntimeCache {
    once: Once::new(),
    cache: None
};

Python::with_gil(|py| {
    // guaranteed to be called once and only once
    cache.once.call_once_py_attached(py, || {
        cache.cache = Some(PyDict::new(py).unbind());
    });
});
}

`GILProtected` is not exposed

GILProtected is a PyO3 type that allows mutable access to static data by leveraging the GIL to lock concurrent access from other threads. In free-threaded Python there is no GIL, so you will need to replace this type with some other form of locking. In many cases, a type from std::sync::atomic or a std::sync::Mutex will be sufficient.

Before:

fn main() {
#[cfg(not(Py_GIL_DISABLED))] {
use pyo3::prelude::*;
use pyo3::sync::GILProtected;
use pyo3::types::{PyDict, PyNone};
use std::cell::RefCell;

static OBJECTS: GILProtected<RefCell<Vec<Py<PyDict>>>> =
    GILProtected::new(RefCell::new(Vec::new()));

Python::with_gil(|py| {
    // stand-in for something that executes arbitrary Python code
    let d = PyDict::new(py);
    d.set_item(PyNone::get(py), PyNone::get(py)).unwrap();
    OBJECTS.get(py).borrow_mut().push(d.unbind());
});
}}

After:

use pyo3::prelude::*;
fn main() {
use pyo3::types::{PyDict, PyNone};
use std::sync::Mutex;

static OBJECTS: Mutex<Vec<Py<PyDict>>> = Mutex::new(Vec::new());

Python::with_gil(|py| {
    // stand-in for something that executes arbitrary Python code
    let d = PyDict::new(py);
    d.set_item(PyNone::get(py), PyNone::get(py)).unwrap();
    // as with any `Mutex` usage, lock the mutex for as little time as possible
    // in this case, we do it just while pushing into the `Vec`
    OBJECTS.lock().unwrap().push(d.unbind());
});
}

If you are executing arbitrary Python code while holding the lock, then you will need to use conditional compilation to use GILProtected on GIL-enabled Python builds and mutexes otherwise. If your use of GILProtected does not guard the execution of arbitrary Python code or use of the CPython C API, then conditional compilation is likely unnecessary since GILProtected was not needed in the first place and instead Rust mutexes or atomics should be preferred. Python 3.13 introduces PyMutex, which releases the GIL while the waiting for the lock, so that is another option if you only need to support newer Python versions.

PyO3 user guide