Memory management

⚠️ Warning: API update in progress 🛠️

PyO3 0.21 has introduced a significant new API, termed the "Bound" API after the new smart pointer Bound<T>.

This section on memory management is heavily weighted towards the now-deprecated "GIL Refs" API, which suffered from the drawbacks detailed here as well as CPU overheads.

See the smart pointer types for description on the new, simplified, memory model of the Bound API, which is built as a thin wrapper on Python reference counting.

Rust and Python have very different notions of memory management. Rust has a strict memory model with concepts of ownership, borrowing, and lifetimes, where memory is freed at predictable points in program execution. Python has a looser memory model in which variables are reference-counted with shared, mutable state by default. A global interpreter lock (GIL) is needed to prevent race conditions, and a garbage collector is needed to break reference cycles. Memory in Python is freed eventually by the garbage collector, but not usually in a predictable way.

PyO3 bridges the Rust and Python memory models with two different strategies for accessing memory allocated on Python's heap from inside Rust. These are GIL Refs such as &'py PyAny, and GIL-independent Py<Any> smart pointers.

GIL-bound memory

PyO3's GIL Refs such as &'py PyAny make PyO3 more ergonomic to use by ensuring that their lifetime can never be longer than the duration the Python GIL is held. This means that most of PyO3's API can assume the GIL is held. (If PyO3 could not assume this, every PyO3 API would need to take a Python GIL token to prove that the GIL is held.) This allows us to write very simple and easy-to-understand programs like this:

use pyo3::prelude::*;
use pyo3::types::PyString;
fn main() -> PyResult<()> {
Python::with_gil(|py| -> PyResult<()> {
    #[allow(deprecated)] // py.eval() is part of the GIL Refs API
    let hello = py
        .eval("\"Hello World!\"", None, None)?
        .downcast::<PyString>()?;
    println!("Python says: {}", hello);
    Ok(())
})?;
Ok(())
}

Internally, calling Python::with_gil() creates a GILPool which owns the memory pointed to by the reference. In the example above, the lifetime of the reference hello is bound to the GILPool. When the with_gil() closure ends the GILPool is also dropped and the Python reference counts of the variables it owns are decreased, releasing them to the Python garbage collector. Most of the time we don't have to think about this, but consider the following:

use pyo3::prelude::*;
use pyo3::types::PyString;
fn main() -> PyResult<()> {
Python::with_gil(|py| -> PyResult<()> {
    for _ in 0..10 {
        #[allow(deprecated)] // py.eval() is part of the GIL Refs API
        let hello = py
            .eval("\"Hello World!\"", None, None)?
            .downcast::<PyString>()?;
        println!("Python says: {}", hello);
    }
    // There are 10 copies of `hello` on Python's heap here.
    Ok(())
})?;
Ok(())
}

We might assume that the hello variable's memory is freed at the end of each loop iteration, but in fact we create 10 copies of hello on Python's heap. This may seem surprising at first, but it is completely consistent with Rust's memory model. The hello variable is dropped at the end of each loop, but it is only a reference to the memory owned by the GILPool, and its lifetime is bound to the GILPool, not the for loop. The GILPool isn't dropped until the end of the with_gil() closure, at which point the 10 copies of hello are finally released to the Python garbage collector.

In general we don't want unbounded memory growth during loops! One workaround is to acquire and release the GIL with each iteration of the loop.

use pyo3::prelude::*;
use pyo3::types::PyString;
fn main() -> PyResult<()> {
for _ in 0..10 {
    Python::with_gil(|py| -> PyResult<()> {
        #[allow(deprecated)] // py.eval() is part of the GIL Refs API
        let hello = py
            .eval("\"Hello World!\"", None, None)?
            .downcast::<PyString>()?;
        println!("Python says: {}", hello);
        Ok(())
    })?; // only one copy of `hello` at a time
}
Ok(())
}

It might not be practical or performant to acquire and release the GIL so many times. Another workaround is to work with the GILPool object directly, but this is unsafe.

use pyo3::prelude::*;
use pyo3::types::PyString;
fn main() -> PyResult<()> {
Python::with_gil(|py| -> PyResult<()> {
    for _ in 0..10 {
        let pool = unsafe { py.new_pool() };
        let py = pool.python();
        #[allow(deprecated)] // py.eval() is part of the GIL Refs API
        let hello = py
            .eval("\"Hello World!\"", None, None)?
            .downcast::<PyString>()?;
        println!("Python says: {}", hello);
    }
    Ok(())
})?;
Ok(())
}

The unsafe method Python::new_pool allows you to create a nested GILPool from which you can retrieve a new py: Python GIL token. Variables created with this new GIL token are bound to the nested GILPool and will be released when the nested GILPool is dropped. Here, the nested GILPool is dropped at the end of each loop iteration, before the with_gil() closure ends.

When doing this, you must be very careful to ensure that once the GILPool is dropped you do not retain access to any owned references created after the GILPool was created. Read the documentation for Python::new_pool() for more information on safety.

This memory management can also be applicable when writing extension modules. #[pyfunction] and #[pymethods] will create a GILPool which lasts the entire function call, releasing objects when the function returns. Most functions only create a few objects, meaning this doesn't have a significant impact. Occasionally functions with long complex loops may need to use Python::new_pool as shown above.

This behavior may change in future, see issue #1056.

GIL-independent memory

Sometimes we need a reference to memory on Python's heap that can outlive the GIL. Python's Py<PyAny> is analogous to Arc<T>, but for variables whose memory is allocated on Python's heap. Cloning a Py<PyAny> increases its internal reference count just like cloning Arc<T>. The smart pointer can outlive the "GIL is held" period in which it was created. It isn't magic, though. We need to reacquire the GIL to access the memory pointed to by the Py<PyAny>.

What happens to the memory when the last Py<PyAny> is dropped and its reference count reaches zero? It depends whether or not we are holding the GIL.

use pyo3::prelude::*;
use pyo3::types::PyString;
fn main() -> PyResult<()> {
Python::with_gil(|py| -> PyResult<()> {
    #[allow(deprecated)] // py.eval() is part of the GIL Refs API
    let hello: Py<PyString> = py.eval("\"Hello World!\"", None, None)?.extract()?;
    #[allow(deprecated)] // as_ref is part of the GIL Refs API
    {
        println!("Python says: {}", hello.as_ref(py));
    }
    Ok(())
})?;
Ok(())
}

At the end of the Python::with_gil() closure hello is dropped, and then the GIL is dropped. Since hello is dropped while the GIL is still held by the current thread, its memory is released to the Python garbage collector immediately.

This example wasn't very interesting. We could have just used a GIL-bound &PyString reference. What happens when the last Py<Any> is dropped while we are not holding the GIL?

use pyo3::prelude::*;
use pyo3::types::PyString;
fn main() -> PyResult<()> {
let hello: Py<PyString> = Python::with_gil(|py| {
    #[allow(deprecated)] // py.eval() is part of the GIL Refs API
    py.eval("\"Hello World!\"", None, None)?.extract()
})?;
// Do some stuff...
// Now sometime later in the program we want to access `hello`.
Python::with_gil(|py| {
    #[allow(deprecated)]  // as_ref is part of the deprecated "GIL Refs" API.
    let hello = hello.as_ref(py);
    println!("Python says: {}", hello);
});
// Now we're done with `hello`.
drop(hello); // Memory *not* released here.
// Sometime later we need the GIL again for something...
Python::with_gil(|py|
    // Memory for `hello` is released here.
()
);
Ok(())
}

When hello is dropped nothing happens to the pointed-to memory on Python's heap because nothing can happen if we're not holding the GIL. Fortunately, the memory isn't leaked. PyO3 keeps track of the memory internally and will release it the next time we acquire the GIL.

We can avoid the delay in releasing memory if we are careful to drop the Py<Any> while the GIL is held.

use pyo3::prelude::*;
use pyo3::types::PyString;
fn main() -> PyResult<()> {
#[allow(deprecated)] // py.eval() is part of the GIL Refs API
let hello: Py<PyString> =
    Python::with_gil(|py| py.eval("\"Hello World!\"", None, None)?.extract())?;
// Do some stuff...
// Now sometime later in the program:
Python::with_gil(|py| {
    #[allow(deprecated)] // as_ref is part of the GIL Refs API
    {
        println!("Python says: {}", hello.as_ref(py));
    }
    drop(hello); // Memory released here.
});
Ok(())
}

We could also have used Py::into_ref(), which consumes self, instead of Py::as_ref(). But note that in addition to being slower than as_ref(), into_ref() binds the memory to the lifetime of the GILPool, which means that rather than being released immediately, the memory will not be released until the GIL is dropped.

use pyo3::prelude::*;
use pyo3::types::PyString;
fn main() -> PyResult<()> {
#[allow(deprecated)] // py.eval() is part of the GIL Refs API
let hello: Py<PyString> =
    Python::with_gil(|py| py.eval("\"Hello World!\"", None, None)?.extract())?;
// Do some stuff...
// Now sometime later in the program:
Python::with_gil(|py| {
    #[allow(deprecated)] // into_ref is part of the GIL Refs API
    {
        println!("Python says: {}", hello.into_ref(py));
    }
    // Memory not released yet.
    // Do more stuff...
    // Memory released here at end of `with_gil()` closure.
});
Ok(())
}